I. APPLICATIONS:
Welding of ships, railroad vehicles, cars and general structures.
II. DESCRIPTIONS:
N-7014 is a high titania type electrode containing iron powder in its coating and is suitable for all position high efficient welding.
As the contact welding can be performed with this electrode, manipulation of electrodes is easy in horizontal fillet or in the groove.
It is also used in vertical downward welding.
Slag detachability is good and it deposits weld metal of lustrous and good appearance.
III. NOTES ON USAGE:
· In the case of vertical downward welding, manipulate the electrode, keeping its tip in contact with mother plate as shown in the sketch.
· Pay attention not to exceed the range of proper currents.Welding with excessive current not only lowers X-ray performance, but also causes increase of spatter, undercut and insufficient slag covering.
· Dry the electrodes at 70-100ºC for 30-60 minutes before use. Excessive moisture absorption lowers usability and may result in some porosity.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Mn |
Si |
P |
S |
0.08 |
0.58 |
0.35 |
0.015 |
0.011 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Yield Point N/mm2(ksi) |
Tensile Strength N/mm2 (ksi) |
Elongation % |
Impact Value °C, J (°F, Ft-Lbs) |
470 (68) |
550 (80) |
25 |
-29°, 60 (-20°, 44) |
VI. WELDING POSITIONS: ALL POSITIONS
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Diameter (mm |
3.2 |
4.0 |
5.0 |
|
Length (mm) |
350 |
350 |
350 |
|
A |
F |
95-140 |
140-200 |
180-250 |
V, O |
90-130 |
120-170 |
140-200 |
Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh
Địa chỉ: Số 9,Ngõ 461 Nguyễn Văn Linh, Q. Long Biên, TP.Hà nội
Tel: 024-38751616 Hotline: 0904499667
Email: [email protected]
============================
Chi nhánh Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh Tại TPHCM
Địa chỉ: Số 1331/15/144 Đường Lê Đức Thọ,Phường 14, Q. Gò Vấp, TP.Hồ Chí Minh
Tel: 024-38751616 Hotline: 0988764055
Email: [email protected]
www.Sieuthiquehan.com