AWS Specification :NONE
JIS Specification: DFWA-700S
Other Specification: NONE
I. APPLICATIONS:
Hard surfacing of shovel teeth, cutter knives of dredger and speed mullers, etc.
II. DESCRIPTION:
TUNGAHARD 950 obtain a weld metal which contains large quantity of dispersed tungsten carbide and withstands heavy soil impact-free abrasion. Machining as-welded condition is impossible.
III. NOTES ON USAGE:
Usually over 200ºC preheating and 500~600ºC postheating are required.
Take care of the increase of cracking tendency when used for over triplelayer welding.
Underlaying with low hydrogen type electrodes (PA-52 or PA-18) is required.
Dry the electrodes at 150~200ºC for 30~60 minutes before use.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Mo |
W |
2.78 |
0.29 |
3.22 |
0.10 |
0.12 |
47.30 |
V. HARDNESS OF WELD METAL: 60-69 HRC (700-950 Hv)
VI. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Size (dia. mm) |
3.2 |
4.0 |
5.0 |
Length (mm) |
350 |
350 |
350 |
Current Range (Amp) |
90 – 130 |
120 – 180 |
170 – 230 |
Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh
Địa chỉ: Số 9,Ngõ 461 Nguyễn Văn Linh, Q. Long Biên, TP.Hà nội
Tel: 024-38751616 Hotline: 0904499667
Email: binhminhthuha@gmail.com
============================
Chi nhánh Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh Tại TPHCM
Địa chỉ: Số 1331/15/144 Đường Lê Đức Thọ,Phường 14, Q. Gò Vấp, TP.Hồ Chí Minh
Tel: 024-38751616 Hotline: 0988764055
Email: binhminhthuha@gmail.com
www.Sieuthiquehan.com